Customer Reviews

A significant plumbing issue was resolved with the replacement of a 2-inch mainline shut-off valve. This was a critical task, ensuring the home's water supply could be managed effectively. Additionally, a new three-quarter-inch ball valve was installed to address a persistent leak that had caused considerable stress for the homeowner. The old valve was carefully removed, and the new one was installed with precision to prevent future leaks. The homeowner expressed relief, and the satisfaction was evident. All work is backed by a comprehensive warranty, providing peace of mind and assurance of quality.

I conducted a comprehensive furnace maintenance check, starting with a thorough inspection of all components, including burners, heat exchangers, and air intake systems. I meticulously cleaned and adjusted parts to ensure optimal performance. I also checked the flue for blockages and verified the proper operation of the thermostat and safety controls. Additionally, I performed a gas leak test and inspected the ventilation system to ensure it was functioning correctly. This maintenance aimed to enhance the furnace's efficiency and safety, ensuring it operates smoothly and reliably for our valued customer.

I began by replacing the 1-inch pressure relief valve (PRV) to ensure it met safety standards and functioned correctly. After installation, I meticulously checked for any leaks, both in the valve and the surrounding plumbing system, to guarantee there were no potential issues. I then tested the water flow to confirm it was adequate and consistent, addressing any irregularities promptly. To ensure optimal performance, I released air from the fixtures, a process that took some time to ensure all trapped air was expelled. This thorough approach helped maintain the integrity of the plumbing system and provided peace of mind to the customer.

A comprehensive whole house water filtration system was successfully installed. The project was completed with attention to detail, enhancing the quality of water for the entire household.

We successfully removed an outdated cast-iron sink from the kitchen, replacing it with a modern Undermount sink chosen by the customer for a kitchen upgrade. The removal process was handled with precision to avoid any damage to surrounding areas. The new sink was installed efficiently, ensuring a perfect fit and seamless integration with existing plumbing. We meticulously checked all connections and fixtures to guarantee everything functioned correctly. Our commitment to quality is evident in the thoroughness of our work and the warranties we provide on all services.

A pressure-reducing valve (PRV) was replaced for a new member. The old 1 1/2 inch PRV was carefully removed and a new one was installed in its place. The new valve was thoroughly tested to ensure it was functioning correctly. This included checking for any leaks and confirming that the pressure was set to the correct level of 60 psi. The system was inspected to ensure everything was working as intended, and the PRV was adjusted to maintain optimal pressure throughout the system. The job was completed to the highest standards, ensuring the safety and efficiency of the plumbing system.

George plumbing went out to a concerned home owner as water heater shut off and was not working properly. George plumbing was able to save the day and reset the control valve on the water heater to return it to normal function without any further repairs needing to be done. George plumbing always strives to have the most cost-effective and efficient solutions to all plumbing and HVAC needs.

Conducted a comprehensive annual maintenance check on the heating system, ensuring optimal performance and efficiency. This included a thorough inspection of all heating components, cleaning and replacing the air filter to enhance air quality and system longevity.

Installed recirc pump.

Heating maintenance