HVAC Service Areas

George Plumbing, Heating & Cooling offers HVAC services. From heater repairs to ac replacements, our team of technicians are here to bring the comfort to your home. Below are areas we service for heating and air conditioning. Call us today!

Recent Jobs and Reviews

Rated 4.9 out of 5 stars based on 30 customer reviews

At a glance

George Plumbing, Heating and Air has completed 10 jobs in November 2026.

The 10 customer reviews shown here average 4.9 out of 5.

The most recent job was on November 17, 2026.

Recent work covers San Diego, CA, Fallbrook, CA, Murrieta, CA, Oceanside, CA and Poway, CA.

Job Locations and Reviews

San Diego, CA - George plumbing was on the move today in Santa Fe. Homeowner was concerned as water was spraying out of supply line underneath bathroom faucet. George plumbing was able to remove the old supply line and reconnect a new supply line that better fit the application. This homeowner was relieved and is happy to no longer have to stress.
Nathan D.
Nathan D. Checked in
George plumbing was on the move today in Santa Fe. Homeowner was concerned as water was spraying out of supply line underneath bathroom faucet. George plumbing was able to remove the old supply line and reconnect a new supply line that better fit the application. This homeowner was relieved and is happy to no longer have to stress.
San Diego, CA 92127
San Diego, CA - I began by carefully shutting off the gas supply to the dryer to ensure safety. Next, I replaced the gas shut-off valve, ensuring it was securely and correctly installed. After the replacement, I meticulously checked for any gas leaks using a soap and water solution, confirming there were no leaks. I then turned the gas supply back on. Additionally, I verified that the water heater was lit and operating efficiently. Throughout the process, I maintained clear communication with the customer, explaining each step and addressing any concerns they had. This job was completed for a long-time customer, reflecting the trust and reliability
Nelson G.
Nelson G. Checked in
I began by carefully shutting off the gas supply to the dryer to ensure safety. Next, I replaced the gas shut-off valve, ensuring it was securely and correctly installed. After the replacement, I meticulously checked for any gas leaks using a soap and water solution, confirming there were no leaks. I then turned the gas supply back on. Additionally, I verified that the water heater was lit and operating efficiently. Throughout the process, I maintained clear communication with the customer, explaining each step and addressing any concerns they had. This job was completed for a long-time customer, reflecting the trust and reliability
San Diego, CA 92128
San Marcos, CA - George plumbing showed up to install brand new Moen Arbor kitchen faucet. Homeowner’s original faucet was not working properly and constantly giving them issues. This new faucet comes with warranty and works exceptionally well. Homeowner was very relieved to finally have their kitchen sink back.
Nathan D.
Nathan D. Checked in
George plumbing showed up to install brand new Moen Arbor kitchen faucet. Homeowner’s original faucet was not working properly and constantly giving them issues. This new faucet comes with warranty and works exceptionally well. Homeowner was very relieved to finally have their kitchen sink back.
San Marcos, CA 92078
San Diego, CA - George plumbing installed brand new Toto ultramax! The old toilet was not flushing properly even after multiple attempts to auger. This new toilet sits 3 inches higher for extra comfort and has a much more slick design. This homeowner was extremely happy with the outcome and functionality of this toilet. And of course George plumbing will back up all work with warranties!
Nathan D.
Nathan D. Checked in
George plumbing installed brand new Toto ultramax! The old toilet was not flushing properly even after multiple attempts to auger. This new toilet sits 3 inches higher for extra comfort and has a much more slick design. This homeowner was extremely happy with the outcome and functionality of this toilet. And of course George plumbing will back up all work with warranties!
San Diego, CA 92128
A significant plumbing issue was resolved with the replacement of a 2-inch mainline shut-off valve. This was a critical task, ensuring the home's water supply could be managed effectively. Additionally, a new three-quarter-inch ball valve was installed to address a persistent leak that had caused considerable stress for the homeowner. The old valve was carefully removed, and the new one was installed with precision to prevent future leaks. The homeowner expressed relief, and the satisfaction was evident. All work is backed by a comprehensive warranty, providing peace of mind and assurance of quality.
A significant plumbing issue was resolved with the replacement of a 2-inch mainline shut-off valve. This was a critical task, ensuring the home's water supply could be managed effectively. Additionally, a new three-quarter-inch ball valve was installed to address a persistent leak that had caused considerable stress for the homeowner. The old valve was carefully removed, and the new one was installed with precision to prevent future leaks. The homeowner expressed relief, and the satisfaction was evident. All work is backed by a comprehensive warranty, providing peace of mind and assurance of quality.
Nathan D.
Nathan D. Checked in
A significant plumbing issue was resolved with the replacement of a 2-inch mainline shut-off valve. This was a critical task, ensuring the home's water supply could be managed effectively. Additionally, a new three-quarter-inch ball valve was installed to address a persistent leak that had caused considerable stress for the homeowner. The old valve was carefully removed, and the new one was installed with precision to prevent future leaks. The homeowner expressed relief, and the satisfaction was evident. All work is backed by a comprehensive warranty, providing peace of mind and assurance of quality.
Fallbrook, CA 92028
I conducted a comprehensive furnace maintenance check, starting with a thorough inspection of all components, including burners, heat exchangers, and air intake systems. I meticulously cleaned and adjusted parts to ensure optimal performance. I also checked the flue for blockages and verified the proper operation of the thermostat and safety controls. Additionally, I performed a gas leak test and inspected the ventilation system to ensure it was functioning correctly. This maintenance aimed to enhance the furnace's efficiency and safety, ensuring it operates smoothly and reliably for our valued customer.
I conducted a comprehensive furnace maintenance check, starting with a thorough inspection of all components, including burners, heat exchangers, and air intake systems. I meticulously cleaned and adjusted parts to ensure optimal performance. I also checked the flue for blockages and verified the proper operation of the thermostat and safety controls. Additionally, I performed a gas leak test and inspected the ventilation system to ensure it was functioning correctly. This maintenance aimed to enhance the furnace's efficiency and safety, ensuring it operates smoothly and reliably for our valued customer.
Nelson G.
Nelson G. Checked in
I conducted a comprehensive furnace maintenance check, starting with a thorough inspection of all components, including burners, heat exchangers, and air intake systems. I meticulously cleaned and adjusted parts to ensure optimal performance. I also checked the flue for blockages and verified the proper operation of the thermostat and safety controls. Additionally, I performed a gas leak test and inspected the ventilation system to ensure it was functioning correctly. This maintenance aimed to enhance the furnace's efficiency and safety, ensuring it operates smoothly and reliably for our valued customer.
San Diego, CA 92128
Temecula, CA - I began by replacing the 1-inch pressure relief valve (PRV) to ensure it met safety standards and functioned correctly. After installation, I meticulously checked for any leaks, both in the valve and the surrounding plumbing system, to guarantee there were no potential issues. I then tested the water flow to confirm it was adequate and consistent, addressing any irregularities promptly. To ensure optimal performance, I released air from the fixtures, a process that took some time to ensure all trapped air was expelled. This thorough approach helped maintain the integrity of the plumbing system and provided peace of mind to the customer.
Nelson G.
Nelson G. Checked in
I began by replacing the 1-inch pressure relief valve (PRV) to ensure it met safety standards and functioned correctly. After installation, I meticulously checked for any leaks, both in the valve and the surrounding plumbing system, to guarantee there were no potential issues. I then tested the water flow to confirm it was adequate and consistent, addressing any irregularities promptly. To ensure optimal performance, I released air from the fixtures, a process that took some time to ensure all trapped air was expelled. This thorough approach helped maintain the integrity of the plumbing system and provided peace of mind to the customer.
Temecula, CA 92592
Review
Installation fine, eager to see results.
Greg - San Diego, CA 92127
San Diego, CA - A comprehensive whole house water filtration system was successfully installed. The project was completed with attention to detail, enhancing the quality of water for the entire household.
Diego D.
Diego D. Checked in
A comprehensive whole house water filtration system was successfully installed. The project was completed with attention to detail, enhancing the quality of water for the entire household.
San Diego, CA 92127
We successfully removed an outdated cast-iron sink from the kitchen, replacing it with a modern Undermount sink chosen by the customer for a kitchen upgrade. The removal process was handled with precision to avoid any damage to surrounding areas. The new sink was installed efficiently, ensuring a perfect fit and seamless integration with existing plumbing. We meticulously checked all connections and fixtures to guarantee everything functioned correctly. Our commitment to quality is evident in the thoroughness of our work and the warranties we provide on all services.
We successfully removed an outdated cast-iron sink from the kitchen, replacing it with a modern Undermount sink chosen by the customer for a kitchen upgrade. The removal process was handled with precision to avoid any damage to surrounding areas. The new sink was installed efficiently, ensuring a perfect fit and seamless integration with existing plumbing. We meticulously checked all connections and fixtures to guarantee everything functioned correctly. Our commitment to quality is evident in the thoroughness of our work and the warranties we provide on all services.
Nathan D.
Nathan D. Checked in
We successfully removed an outdated cast-iron sink from the kitchen, replacing it with a modern Undermount sink chosen by the customer for a kitchen upgrade. The removal process was handled with precision to avoid any damage to surrounding areas. The new sink was installed efficiently, ensuring a perfect fit and seamless integration with existing plumbing. We meticulously checked all connections and fixtures to guarantee everything functioned correctly. Our commitment to quality is evident in the thoroughness of our work and the warranties we provide on all services.
Fallbrook, CA 92028
Fallbrook, CA - A pressure-reducing valve (PRV) was replaced for a new member. The old 1 1/2 inch PRV was carefully removed and a new one was installed in its place. The new valve was thoroughly tested to ensure it was functioning correctly. This included checking for any leaks and confirming that the pressure was set to the correct level of 60 psi. The system was inspected to ensure everything was working as intended, and the PRV was adjusted to maintain optimal pressure throughout the system. The job was completed to the highest standards, ensuring the safety and efficiency of the plumbing system.
Nelson G.
Nelson G. Checked in
A pressure-reducing valve (PRV) was replaced for a new member. The old 1 1/2 inch PRV was carefully removed and a new one was installed in its place. The new valve was thoroughly tested to ensure it was functioning correctly. This included checking for any leaks and confirming that the pressure was set to the correct level of 60 psi. The system was inspected to ensure everything was working as intended, and the PRV was adjusted to maintain optimal pressure throughout the system. The job was completed to the highest standards, ensuring the safety and efficiency of the plumbing system.
Fallbrook, CA 92028
Review
Great service
Jim - Oceanside, CA 92057
Review
Kind helpful clean and excellent service
Larry - Poway, CA 92064
Review
Did a great job from start to finish
E Henderson - San Diego, CA 92128
Review
Our technician, Nelson, is very personable, attention to detail and efficient. He takes the time to explain everything in detail and makes sure you understand the issue. Great service!
Brenda - Fallbrook, CA 92028
Review
Nelson is great!
Lori - San Diego, CA 92128
Review
Kevin was helpful, professional and courteous!
Keith - San Diego, CA 92128
Review
Excellent service!
Bonnie - Fallbrook, CA 92028
Review
Professional, Courteous, knowledgeable
Gary - Murrieta, CA 92563
Review
Thorough job. Attention to details
Charleen - Murrieta, CA 92563